Heka- 2 Plate - Brake / Toe and Suspension Tester for axel upto 5 tonne

2 Plate Platform BRAKE / SUSPENSION for CARS & LCV.

Height 4-cm above floor, for easy mounting on the floor!

Brakes + weight +suspension + toe + PC connection

Approved by the German technical inspection authorities.

The LARGE MONITOR (INCLUDED) serves as a clearly arranged display to show the results in colour

Results of brake diagnosis in numbers and bar graphic:
green = OK, yellow = medium, red = not OK (defective)
Results of shock absorber diagnosis in numbers and curve graphics in colour.
Toe testing results in 1/10 millimeters with tolerance analysis for front and rear axle.

Simplest operation, fully automatic, fastest diagnosing in just 30 seconds.

High-speed sensors with high resolution for the brake and shock absorber analysis
Especially suitable for 4-wheel drive and low-chassis cars of an axle load up to 5 tons.

Very flat, height only 4 centimetres above floor, plate construction, fits in every
garage entrance for acceptance of customers or as drive-through.
Cars can drive over the solid floor elements also from the side
 

CONTENTS….

• 2 testing segments, brake + weight +suspension, height above floor 4 cm.
• 2 testing segments, toe flexible and fixed, 5-ton axle load.
• Includes up- and down-ramps, also suitable for subfloor installation (see image).
• Large Monitor for clear and easy visiual results
• Installation kit with ready-to-plug cabling.

Platform BRAKE  / SUSPENSION tester for CARS & LCV.

A complete range of platform brake testers, designed and developed by Heka in Germany for more than 35 years.

A combination of technology and reliability for modern service centers that need to accurately tests every kind of vehicle saving time and money.

Energy costs significantly lower than the use of conventional roller brake testers

4 cm above floor, fully automatic 4-plate testing lane!

Brakes + suspension + toe + PC  connection

Approved by the German technical inspection authorities. For safety inspection,,

Your computer screen serves as a clearly arranged display to show the results in colour

Fully automatic testing procedure:

1. testing cycle: diagnosis of toe on front axle and brakes, suspension on
all four wheels simultaneously, results are saved automatically.

2. testing cycle: diagnosis of toe on rear axle and hand brake, ELECTRIC HANDBRAKE, drive on…
results are saved automatically.

3. Prompt printout of all results automatically.

Results of brake diagnosis in numbers and bar graphic:
green = OK, yellow = medium, red = not OK (defective)
Results of shock absorber diagnosis in numbers and curve graphics in colour.
Toe testing results in 1/10 millimeters with tolerance analysis for front and rear axle.

Simplest operation, fully automatic, fastest diagnosing in just 30 seconds.*

High-speed sensors with high resolution for the brake and shock absorber analysis
Especially suitable for 4-wheel drive and low-chassis cars of an axle load up to 5 tons.

Very flat, height only 4 centimetres above floor, plate construction, fits in every
garage entrance for acceptance of customers or as drive-through.
Cars can drive over the solid floor elements also from the side.